|
Caipo slubbing microprocessor
Caipo Automazione Industriale equipments for fancy yarns,
has worked out, for a continuous improvement of the slub yarn quality and in
order to give more space to creativity, a new slubbing device, technologically
advanced, very flexible and of easy utilisation, whose name is: CSM90.
 Advantages
and features
- It is possible to get every slub length but not
shorter than the fibre length; on the open-end frames the minimum slub length
is equal to the circumference of the rotor fitted on the machine;
- Quick and easy call of the programs by means of
a menu;
- The slubs production is possible with a completely
random sequence or with a repetition which can be set according to the effect
desired on the fabric;
- Internal memory containing 10 programs which are
kept stored also in case of lack of power supply for 1 month;
- Solid external cartridge on which you can store
30 programs available at once;
- Constancy and possibility to repeat the preset programs
with the control of the electric motor and of all preset parameters by the
microprocessor;
- Setting of the slub lengths and counts according
to the program and real-time electronic control of the parameters and of the
yarn obtained;
- No damage with respect to the average count of the
slub yarn resistance, thanks to the electronic control of the first drawing
(or drawings) acceleration ramps which avoid the kinematic slacks and therefore
the cut after the slub;
- Easy and simple installation on every kind of spinning
frame. The machine stop required is reduced for very long spinning frames
too, where it’s necessary the acceleration synchronism on head and tall
to eliminate the twisting moment of the drafting assemblies;
- Simple and quick cut-out of the slubs production
through an electronic key; no mechanical intervention is necessary;
- Low cost of maintenance.
|
E-Mail
Print
